AUDI VOLKSWAGEN MQB platform key making directions with MQB key making cables

Devices & Tools：AUDI & VOLKSWAGEN MQB key making cables、5054A、VVDI2；

Abstract:

1. Dismantle the ECU from the Engine compartment, use theAUDI & VOLKSWAGEN MQB key making cables to connect the ECU, substitution instrument cluster, gateway and BCM module, then connect the 5054A via the OBD interface of the cables, open the ODIS software on computer, enter the special function, Immobilizer adapting, the new immo dump will be write into the substitution instrument cluster .

2. Use VVDI2/ AP to read the immo dump from the substitution instrument cluster and save files.

3. reassemble back the ECU, use VVDI 2 to generate key in the car;

4. Use VVDI 2 to study the new made key in the car.

Support:

AUDI A3/S3 2014+;

AUDI Q2;

Volkswagen Golf7;

Volkswagen Polo(MQB);

Volkswagen Tiguan II

Volkswagen Touran II

Volkswagen Crafter 2017+;

Volkswagen PASSAT B8 without virtual cockpit;

Skoda Octavia III 2014.07+;

Skoda repaid 2015.06 +

Skoda kodiaq;

Skoda Superb III;

Seat Ibiza/ Ateca/ Toledo 2015.06 +.