Wednesday, May 30, 2018

VOLKSWAGEN AUDI DSG gearbox control unit TCU programmer DSG reader

 
1. It is used for Audi and for VW new cars.
2. Supported Language: English Only
3. Operating System Requirement: WINDOWS XP System
4. After you install the software, you need to send us the ID for activation. otherwise, it will tell " License Expired"
 
MINI DSG Reader Description:
Usually the tool for reading/writing new VW/AUDI gearbox data is few and very expensive, now the low cost tool is coming. You don't need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.MINI DSG reader can solve your audi /vw gearbox fault code problem. Read and write VW / AUDI latest dual-clutch DSG gearbox data.Only used for AUDI and VW new cars after 2000.









Saturday, April 21, 2018

How to repair NISSAN ECU TEANA ECU fuel injection and ignition failure ECU repair


Whatsapp/ Viber/ Telegram/ BBM: +8617154835574
Website: www.u-obd.com

Car Brand: NISSAN
Car Model: TEANA
Fault code & symptom: Engine not start, no fuel injection, no ignition,
No fault code record scaned by Launch X431.
Repair solution: Open the ECU, find the chip Model No: L9302 on the front side,
use hot air gun desoldering the chip, please mind do not desoldering the surrounding
tiny components accidently, recommend use protect tinfoil to fixed them before use the
hot air gun to desoldering, slowly and careful desoldering the L9302, the temperature should
control in a reasonable range.
the clear the board carefully, buy a new L9302, soldering the new L9302 on the board
reassemble back the ECU, all is down.




Steve Powell
For more technical communication, ECU repair experience exchange,newest devices,tools
please contact me via:
Whatsapp: +8617154835574,
skype: live:u-obd
E-mail: uobd360@gmail.com
Facebook page:UOBDIAG

Friday, April 13, 2018

Audi 01J gearbox for AUDI A4 AUDI A6 TCU diagram

Audi 01J gearbox TCU diagram please enjoy.
 ECU repair tools, diagnose device and ECU IC chips please browse my store: www.u-obd.com



Monday, April 9, 2018

AUDI VOLKSWAGEN MQB platform key making directions with MQB key making cables

Devices & Tools:AUDI & VOLKSWAGEN MQB key making cables、5054A、VVDI2;



Abstract:
1. Dismantle the ECU from the Engine compartment, use theAUDI & VOLKSWAGEN MQB key making cables to connect the ECU, substitution instrument cluster, gateway and BCM module, then connect the 5054A via the OBD interface of the cables, open the ODIS software on computer, enter the special function, Immobilizer adapting, the new immo dump will be write into the substitution instrument cluster .
2. Use VVDI2/ AP to read the immo dump from the substitution instrument cluster and save files.
3. reassemble back the ECU, use VVDI 2 to generate key in the car;
4. Use VVDI 2 to study the new made key in the car.
Support:
AUDI A3/S3 2014+;
AUDI Q2;
Volkswagen Golf7;
Volkswagen Polo(MQB);
Volkswagen Tiguan II
Volkswagen Touran II
Volkswagen Crafter 2017+;
Volkswagen PASSAT B8 without virtual cockpit;
Skoda Octavia III 2014.07+;
Skoda repaid 2015.06 +
Skoda kodiaq;
Skoda Superb III;
Seat Ibiza/ Ateca/ Toledo 2015.06 +.

















Monday, March 26, 2018

TOYOTA 5A-FE Engine ECU components function index illustrate

El motor clásico TOYOTA 5A-FE se usó comúnmente en COROLLA EX y en muchas otras marcas de automóviles, aquí comparto el índice funcional de los componentes de la ECU, que puede ayudar al reparador de ECU, a la provisión profesional de componentes ECU: http: //www.u- obd.com/product-category/auto-ecu/



Sunday, March 25, 2018

SIMOS 3.3 ECU inner board IC function illustrate for Volkswagen Jetta

SIMOS 3.3 ECU inner board IC function illustrate for Volkswagen Jetta. if you think it's useful, please share to more people in need, thank you! www.u-obd.com


AUDI A6 Q5 ESL/ ELV Module J518 repair solution & repair kits


AUDI steer column Module – J518 is easy been damaged, it’s a common problem, when the J518
Module is failure, the following problems will occurred when insert the key:

1. Steer column will not be unlocked;
2. Car will not start;
3. Dashboard can not be light up.
But the key can rotate normally.
Repair solutions:
1. dismantle the J518 Module form the car, open it, use XPROG read the MCU, there are three kind of MCU Model exist:
Read both the flash and eeprom dump from the MCU and saved on desktop, the XPROG wiring diagram:
2. Buy new MCU from www.u-obd.com, as the MCU is new and blank, use the XPROG write the dump been saved in the first step in to the new MCU, then solder back on the J518 circuit board.
3. Change the Relays Model No: ACT512;
4. Better change the micro switch and the ELV motor as well.

5. If the J518 circuit board is burned or badly damaged, or don’t want to do time -comsuming soldering work, better change a new blank circuit board.
Attention: When change the MCU, Desoldering the MCU, please mind the small resistors beside the MCU, The hot air gun may damaged the resistor, please be carful.

2. if the MCU is totally damaged and can not read the dump out, ask some one to share a dump, after write into the new MCU or new blank circuit board, use device to do adapting work.

Thanks for reading! If you like it please share to more people in need.

--- Steve Powell
Skype: live:u-obd
WhatsApp/ Viber/ BBM/ Telegram: +8617154835574.